Brand: Cisco · SKU: PWR-C45-6000ACV · MPN: PWR-C45-6000ACV · Category: Components

Cisco Catalyst 4500 6000 WAC Power Supply (PoE)
| Model | PWR-C45-6000ACV |
|---|---|
| Weight | kg |
| FAN OK LED | Green: Power supply fan is operating properly. Off: Power supply fan failure is detected. |
| kVA rating | 6.8 kVA (power factor = 0.99) |
| INPUT OK LED | Green: Source AC voltage is OK (input voltage is 85 VAC or greater). Off: Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. |
| AC-input type | Autoranging inputs with power factor correction. Power factor correction (PFC) is a standard feature on all Catalyst 4500 E-series AC-input power supplies. PFC reduces the reactive component in the source AC current, allowing higher power factors (typically 99% or better) and lower harmonic current components. |
| OUTPUT FAIL LED | Red: Problem with one or more of the DC-output voltages of the power supply is detected. Off: DC-output voltage within acceptable margins. For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray assembly and one supervisor engine. Systems with dual power supplies must have a minimum of one fan tray assembly, one supervisor engine, and one additional module; otherwise a false power supply output fail signal may occur. |
| AC-input current | 12 A (max) @ 120 VAC (for each input); 16 A (max) @ 230 VAC (for each input) |
| AC-input voltage | Low-line (120 VAC nominal): 85 VAC (min) to 132 VAC (max); High-line (230 VAC nominal): 170 VAC (min) to 264 VAC (max) |
| Heat dissipation | 2,720 BTU/hr (approx.) |
| LEDs and meanings | Front-panel status LEDs: INPUT OK, FAN OK, OUTPUT FAIL |
| AC-input frequency | 50/60 Hz (nominal), ±3% for full range |
| Output holdup time | 20 ms minimum |
| Power over Ethernet (PoE) | Supported, up to 4800 W |
| Minimum software requirement | Cisco IOS Release 12.2(52)SG |
| Power supply output capacity | 6000 W maximum |
| Power supply output (general) | Total output depends on the number of inputs connected and the source AC voltage. If two inputs are used, both must be of the same AC voltage. |
| 1050 W operation (one 120 VAC nominal input) | 70.8 A @ 12 VDC (data only); 12.5 A @ 3.3 VDC (data only); 18.4 A @ -50 VDC (PoE if used) |
| 3000 W operation (one 230 VAC nominal input) | 183.3 A @ 12 VDC (data only); 12.5 A @ 3.3 VDC (data only); 48 A @ -50 VDC (PoE if used) |
| 2100 W operation (two 120 VAC nominal inputs) | 141.6 A @ 12 VDC (data only); 12.5 A @ 3.3 VDC (data only); 37.0 A @ -50 VDC (PoE if used) |
| 6000 W operation (two 230 VAC nominal inputs) | 183.3 A @ 12 VDC (data only); 12.5 A @ 3.3 VDC (data only); 96 A @ -50 VDC (PoE if used) |
| Warranty | 3-Year Warranty |
Yes, this PWR-C45-6000ACV, Cisco Catalyst 4500 Power Supply, 6000W AC, Dual Input, Data+PoE (PWR-C45-6000ACV) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This PWR-C45-6000ACV, Cisco Catalyst 4500 Power Supply, 6000W AC, Dual Input, Data+PoE includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the PWR-C45-6000ACV.