AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack
Brand: Cisco · SKU: AIRAP1852I-BK910C · MPN: AIRAP1852I-BK910C · Category: Networking
Request for Quote
In Stock • 10 units
Cisco Aironet 1850i Series 10-pack with Mobility Expre, B Regulatory Domain
Specifications
| Model | AIRAP1852I-BK910C |
|---|---|
| Weight | 3.12 kg |
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software) |
| Power draw | 20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. |
| Description | Cisco Aironet 1850i Series 10-pack with Mobility Expre, B Regulatory Domain 鈽?Model number ending in C is, by default, factory-shipped with a Cisco Mobility Express software image. |
| Environmental | Cisco Aironet 1850i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25藲C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40藲C, 9843 ft. |
| System memory | 1GB DRAM 256MB flash |
| Deployment modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering options | 802.3at Enhanced PoE Cisco power injector, AIR-PWRINJ4= Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:this injector supports 802.3af only) 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e. |
| Regulatory Domain | B (B regulatory domain): - 2.412 to 2.462GHz; 3 channels - 5.180 to 5.320GHz; 8 channels - 5.500 to 5.720GHz; 12 channels - 5.745 to 5.825GHz; 5 channels |
| Integrated antenna | 2.4GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° |
| Dimensions (W x L x H) | Access point (without mounting bracket): 8.3 x 8.3 x 2in. (210.8 x 210.8 x 50.8mm) |
| Input power requirements | AP1850: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz |
| 802.11ac Wave 1 and 2 capabilities | 4x4 MIMO with four spatial streams, single-user MIMO 4x4 MIMO with three spatial streams, multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 1.7Gbps (80MHz in 5GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Rogue device detection |
| Supported wireless LAN controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 S eries Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller Cisco Mobility Express |
| 802.11n version 2.0 (and related) capabilities | 4x4 MIMO with four spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 600Mbps (40MHz with 5GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack (AIRAP1852I-BK910C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIRAP1852I-BK910C.
More in Networking
- AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-B-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIR-AP1852I-B-K9, Cisco AIR Series Access Point, 802.11ac Wave2/4x4:4 MIMO/Internal Antenna
- AIRAP1852I-CK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave2/4x4 MIMO/10-pack
- AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
- AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-AK910C, Cisco Aironet 1850i Access Point, 802.11ac Wave 2/4x4 MU-MIMO/10-pack
- AIR-AP1852E-Z-K9, Cisco AIR-AP1852E Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/External Antenna