AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna
Brand: Cisco · SKU: AIR-AP1852I-BK910 · MPN: AIR-AP1852I-BK910 · Category: Networking
802.11ac Wave 2, 10 Access Points, 4x4:4, Internal Antenna, B Regulatory Domain
Specifications
| Model | AIR-AP1852I-BK910 |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED: boot loader status, association status, operating status, warnings, errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), PoE; 1 x 10/100/1000BASE-T autosensing (RJ-45) AUX (Link Aggregation); Management console port (RJ-45); USB 2.0 (future software enabled) |
| Power Draw | 20.9W. Note: When powered by PoE, actual draw from equipment may be higher depending on cable length. |
| Description | 802.11ac Wave 2, 10 Access Points, 4x4:4, Internal Antenna, B Regulatory Domain |
| Environmental | Storage temperature: -30°C to 70°C; Storage altitude: 25°C, 15,000 ft.; Operating temperature: 0°C to 40°C; Operating humidity: 10% to 90% (noncondensing); Operating altitude: 40°C, 9843 ft. |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE; Cisco power injector AIR-PWRINJ4=; Cisco local power supply AIR-PWR-C=; Cisco power injector AIR-PWRINJ5= (supports 802.3af only); 802.3af. Note: With 802.3af power, 1852e 2.4 GHz radio changes to 2x3 from 3x4; USB and AUX Ethernet port are disabled on both 1852i and 1852e. |
| Regulatory Domain | B (2.412–2.462 GHz: 3 channels; 5.180–5.320 GHz: 8 channels; 5.500–5.720 GHz: 12 channels; 5.745–5.825 GHz: 5 channels) |
| Integrated Antenna | 2.4 GHz: gain 3 dBi, internal omni, 360° horizontal beamwidth; 5 GHz: gain 5 dBi, internal omni, 360° horizontal beamwidth |
| 802.11n Capabilities | 4x4 MIMO with four spatial streams; Maximal ratio combining (MRC); 20/40 MHz channels; PHY data rates up to 600 Mbps (40 MHz, 5 GHz); Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx); 802.11 DFS; Cyclic shift diversity (CSD) |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
| Input Power Requirements | AP1850: 44–57 VDC; Power supply & injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO with four spatial streams, single-user MIMO; 4x4 MIMO with three spatial streams, multiuser MIMO; MRC; 802.11ac beamforming; 20/40/80 MHz channels; PHY data rates up to 1.7 Gbps (80 MHz, 5 GHz); Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx); 802.11 DFS; CSD; Rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500 Series, ISR G2 Wireless Controller Module, WiSM2 for Catalyst 6500, Cisco 5500, Flex 7500, 8500, 5760 Series Wireless Controllers, Catalyst 3650/3850 switch with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna (AIR-AP1852I-BK910) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-BK910.
More in Networking
- AIR-AP1852I-B-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIR-AP1852I-B-K9, Cisco AIR Series Access Point, 802.11ac Wave2/4x4:4 MIMO/Internal Antenna
- AIRAP1852I-CK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave2/4x4 MIMO/10-pack
- AIR-AP1852I-C-K9C, Cisco AIR-AP1852, Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna
- AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack
- AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
- AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-AK910C, Cisco Aironet 1850i Access Point, 802.11ac Wave 2/4x4 MU-MIMO/10-pack