AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
Brand: Cisco · SKU: AIR-AP1852I-A-K9 · MPN: AIR-AP1852I-A-K9 · Category: Networking
$641.24
In Stock • 10 units
802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, A Regulatory Domain (not for USA)
Specifications
| Model | AIR-AP1852I-A-K9 |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, and errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), PoE; 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (Link Aggregation); Management console port (RJ-45); USB 2.0 (future software enabled) |
| Power Draw | 20.9 W Note: Power drawn from PoE source can be higher, depending on cable length |
| System Memory | 1 GB DRAM; 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect™, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector AIR-PWRINJ4=, Cisco local power supply AIR-PWR-C=, Cisco power injector AIR-PWRINJ5= (supports 802.3af only), 802.3af. Note: With 802.3af PoE, 1852e 2.4-GHz radio shifts to 2x3, and USB/AUX Ethernet ports are disabled on both 1852i and 1852e. |
| Integrated Antenna | 2.4 GHz: 3 dBi gain, internal omni, 360° horizontal beamwidth; 5 GHz: 5 dBi gain, internal omni, 360° horizontal beamwidth |
| Environmental (1850e) | Storage temperature: -30°C to 70°C (-22°F to 158°F); Storage altitude: 25°C, 4,572 m (15,000 ft); Operating temperature: -20°C to 50°C (-4°F to 122°F); Operating humidity: 10% to 90% (noncondensing); Operating altitude: 40°C, 3,000 m (9,843 ft) |
| Environmental (1850i) | Storage temperature: -30°C to 70°C (-22°F to 158°F); Storage altitude: 25°C, 4,572 m (15,000 ft); Operating temperature: 0°C to 40°C (32°F to 104°F); Operating humidity: 10% to 90% (noncondensing); Operating altitude: 40°C, 3,000 m (9,843 ft) |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm), access point without mounting bracket |
| Input Power Requirements | AP1850: 44 to 57 VDC; Power supply and injector: 100 to 240 VAC, 50 to 60 Hz |
| 802.11n Version 2.0 Capabilities | 4x4 MIMO with four spatial streams, Maximal ratio combining (MRC), 20- and 40-MHz channels, PHY data rates up to 600 Mbps (40 MHz with 5 GHz), Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), 802.11 dynamic frequency selection (DFS), Cyclic shift diversity (CSD) support |
| 802.11ac Wave 1 and 2 Capabilities | 4x4 MIMO with four spatial streams (single-user MIMO), 4x4 MIMO with three spatial streams (multiuser MIMO), MRC, 802.11ac transmit beamforming, 20-, 40-, and 80-MHz channels, PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz), Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), 802.11 DFS, CSD support, Rogue device detection |
| External Antenna (Sold Separately) | Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz). Cisco offers a wide selection for various deployment scenarios |
| Supported Wireless LAN Controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna (AIR-AP1852I-A-K9) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-A-K9.
More in Networking
- AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack
- AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-B-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIR-AP1852I-B-K9, Cisco AIR Series Access Point, 802.11ac Wave2/4x4:4 MIMO/Internal Antenna
- AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-AK910C, Cisco Aironet 1850i Access Point, 802.11ac Wave 2/4x4 MU-MIMO/10-pack
- AIR-AP1852E-Z-K9, Cisco AIR-AP1852E Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/External Antenna
- AIR-AP1852E-Z-K9C, Cisco AIR-AP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/External Antenna