AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
Brand: Cisco · SKU: AIR-AP1852I-A-K9C · MPN: AIR-AP1852I-A-K9C · Category: Networking
802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, A Regulatory Domain, Configurable
Specifications
| Model | AIR-AP1852I-A-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED reports boot loader status, association, operation, warnings, errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE); 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (Link Aggregation); Management console port (RJ-45); USB 2.0 (via future software) |
| Environmental | Storage temperature: -30°C to 70°C (-22°F to 158°F); Storage altitude: 25°C, 4,572 m (15,000 ft); Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 10% to 90% (noncondensing); Operating altitude: 40°C, 3,000 m (9,843 ft) |
| System Memory | 1 GB DRAM; 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at; Enhanced PoE; Cisco power injector AIR-PWRINJ4=; Cisco local power supply AIR-PWR-C=; Cisco power injector AIR-PWRINJ5= (802.3af only); 802.3af Note: With 802.3af PoE, 1852e 2.4-GHz radio runs 2x3, USB and AUX Ethernet disabled. |
| Power Consumption | 20.9 W Note: Power draw from sourcing equipment may increase depending on cable length when using PoE. |
| Integrated Antenna | 2.4 GHz: gain 3 dBi, internal omnidirectional, 360° horizontal beamwidth; 5 GHz: gain 5 dBi, internal omnidirectional, 360° horizontal beamwidth |
| 802.11n Capabilities | 4x4 MIMO with four spatial streams; Maximal ratio combining (MRC); 20- and 40-MHz channels; PHY data rates up to 600 Mbps at 40 MHz (5 GHz); Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx); 802.11 DFS; Cyclic shift diversity (CSD) support |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm), without mounting bracket |
| Input Power Requirements | AP1850: 44 to 57 VDC; Power supply and injector: 100 to 240 VAC, 50 to 60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO four spatial streams (single-user), 4x4 MIMO three spatial streams (multiuser); MRC; 802.11ac beamforming; 20-, 40-, 80-MHz channels; PHY data rates up to 1.7 Gbps (80 MHz, 5 GHz); Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx); 802.11 DFS; CSD support; Rogue device detection |
| External Antenna (sold separately) | Certified for antenna gains up to 6 dBi (2.4 GHz and 5 GHz); Cisco offers a wide selection for different deployment needs |
| Supported Wireless LAN Controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 (AIR-AP1852I-A-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIR-AP1852I-A-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-A-K9C.
More in Networking
- AIR-AP1852I-A-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
- AIRAP1852I-BK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac/10-pack
- AIR-AP1852I-BK910, Cisco AIR-AP1852I, Wireless Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-B-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-AK910C, Cisco Aironet 1850i Access Point, 802.11ac Wave 2/4x4 MU-MIMO/10-pack
- AIR-AP1852E-Z-K9, Cisco AIR-AP1852E Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/External Antenna
- AIR-AP1852E-Z-K9C, Cisco AIR-AP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/External Antenna
- AIR-AP1852E-T-K9, Cisco AIR-AP1800 Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/External-Antenna