Brand: Cisco · SKU: AIR-AP1852E-A-K9 · MPN: AIR-AP1852E-A-K9 · Category: Networking

802.11ac Wave 2 Access Point, 4x4:4, External-Ant, A Regulatory Domain
| Model | AIR-AP1852E-A-K9 |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED: boot loader, association, operation status, warnings, errors |
| Interfaces | 1 x 10/100/1000BASE-T (RJ-45, Power over Ethernet), 1 x 10/100/1000BASE-T AUX (Link Aggregation), Management console port (RJ-45), USB 2.0 (future software enabled) |
| Power Draw | 20.9 W Note: Power drawn via PoE may be higher depending on cable length. |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect™, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector AIR-PWRINJ4=, Cisco local power supply AIR-PWR-C=, Cisco power injector AIR-PWRINJ5= (supports 802.3af only), 802.3af Note: If 802.3af PoE is used, (1) 1852e 2.4 GHz radio shifts to 2x3 mode; (2) USB and AUX Ethernet ports are disabled on 1852i and 1852e. |
| Integrated Antenna | 2.4 GHz: 3 dBi, internal omni, 360° horizontal; 5 GHz: 5 dBi, internal omni, 360° horizontal |
| 802.11n Capabilities | 4x4 MIMO with four spatial streams, Maximal Ratio Combining (MRC), 20- and 40-MHz channels, PHY rates up to 600 Mbps (40 MHz, 5 GHz), Packet aggregation (A-MPDU/A-MSDU Tx/Rx), 802.11 DFS, Cyclic Shift Diversity (CSD) |
| Environmental (1850e) | Storage temperature: -30°C to 70°C (-22°F to 158°F); Storage altitude: 25°C, 15,000 ft.; Operating temperature: -20°C to 50°C (-4°F to 122°F); Operating humidity: 10%–90% (noncondensing); Operating altitude: 40°C, 9,843 ft. |
| Environmental (1850i) | Storage temperature: -30°C to 70°C (-22°F to 158°F); Storage altitude: 25°C, 15,000 ft.; Operating temperature: 0°C to 40°C (32°F to 104°F); Operating humidity: 10%–90% (noncondensing); Operating altitude: 40°C, 9,843 ft. |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm), without mounting bracket |
| Input Power Requirements | AP1850: 44–57 VDC; Power supply/Injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1 and 2 Capabilities | 4x4 MIMO four spatial streams (single-user), 4x4 MIMO three spatial streams (multiuser), MRC, 802.11ac beamforming, 20/40/80 MHz channels, PHY rates up to 1.7 Gbps (80 MHz in 5 GHz), Packet aggregation (A-MPDU/A-MSDU Tx/Rx), 802.11 DFS, CSD, Rogue device detection |
| External Antenna (Sold Separately) | Certified for antenna gains up to 6 dBi (2.4 GHz & 5 GHz). Cisco offers wide antenna options for various scenarios |
| Supported Wireless LAN Controllers | Cisco 2500 Series, ISR G2 Wireless Controller Module, WiSM2 for Catalyst 6500, Cisco 5500, Flex 7500, 8500, 5760, Catalyst 3650/3850 with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852E-A-K9, Cisco AIR-AP1852E, Access Point, 802.11ac Wave 2/4x4:4 MIMO/External Antenna (AIR-AP1852E-A-K9) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852E-A-K9, Cisco AIR-AP1852E, Access Point, 802.11ac Wave 2/4x4:4 MIMO/External Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852E-A-K9.