AIRAP1852E-BK910C, Cisco AIRAP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MU-MIMO/External Antenna

Brand: Cisco · SKU: AIRAP1852E-BK910C · MPN: AIRAP1852E-BK910C · Category: Networking

AIRAP1852E-BK910C, Cisco AIRAP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MU-MIMO/External Antenna
$7,695.80
In Stock • 10 units

802.11ac Wave 2, 10 Access Points, 4x4:4, External Antenna, E Regulatory Domain, Configurable

View Wireless APs Products

Specifications

ModelAIRAP1852E-BK910C
Weight3.12 kg
SoftwareCisco Unified Wireless Network Software Release with AireOS wireless controllers: · 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points
Indicators· Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Interfaces· 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) · 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) · Management console port (RJ-45) · USB 2.0 (enabled via future software)
Power draw· 20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
Description802.11ac Wave 2, 10 Access Points, 4x4:4, External Antenna, B Regulatory Domain, Configurable
EnvironmentalCisco Aironet 1850e · Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) · Nonoperating (storage) altitude test: 25藲C, 15,000 ft. · Operating temperature: -4° to 122°F (-20° to 50°C) · Operating humidity: 10% to 90% (noncondensing) · Operating altitude test: 40藲C, 9843 ft.
System memory· 1GB DRAM · 256MB Flash
Deployment modesCentralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh
Powering options· 802.3at · Enhanced PoE · Cisco power injector, AIR-PWRINJ4= · Cisco local power supply, AIR-PWR-C= · Cisco power injector, AIR-PWRINJ5= ( Note: this injector supports 802.3af only) · 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e.
Regulatory DomainB (B regulatory domain): - 2.412 to 2.462GHz; 3 channels - 5.180 to 5.320GHz; 8 channels - 5.500 to 5.720GHz; 12 channels - 5.745 to 5.825GHz; 5 channels
Dimensions (W x L x H)· Access point (without mounting bracket): 8.3 x 8.3 x 2in. (210.8 x 210.8 x 50.8mm)
Input power requirements· AP1850: 44 to 57 VDC · Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
802.11ac Wave 1 and 2 capabilities· 4x4 MIMO with four spatial streams, single-user MIMO · 4x4 MIMO with three spatial streams, multiuser MIMO · MRC · 802.11ac beamforming (transmit beamforming) · 20-, 40-, and 80-MHz channels · PHY data rates up to 1.7Gbps (80MHz in 5GHz) · Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) · 802.11 DFS · CSD support · Rogue device detection
External antenna (sold separately)· Certified for use with antenna gains up to 6 dBi (2.4GHz and 5GHz) · Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
Supported wireless LAN controllers· Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller · Cisco Mobility Express
802.11n version 2.0 (and related) capabilities· 4x4 MIMO with four spatial streams · Maximal ratio combining (MRC) · 20- and 40-MHz channels · PHY data rates up to 600Mbps (40MHz with 5GHz) · Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) · 802.11 dynamic frequency selection (DFS) · Cyclic shift diversity (CSD) support
Warranty3-Year Warranty

Key Features

  • OEM Genuine Component verified by certified technicians.
  • Clean serial number ready for service contract registration.
  • Electrostatic Discharge (ESD) safe packaging.
  • Supports hot-swapping for zero-downtime maintenance.

Frequently Asked Questions

Is this product genuine OEM?

Yes, this AIRAP1852E-BK910C, Cisco AIRAP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MU-MIMO/External Antenna (AIRAP1852E-BK910C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.

What warranty is included?

This AIRAP1852E-BK910C, Cisco AIRAP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MU-MIMO/External Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.

How long does shipping take?

We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.

Can I return this product?

Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.

Is the AIRAP1852E-BK910C, Cisco AIRAP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MU-MIMO/External Antenna compatible with my system?

Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIRAP1852E-BK910C.

More in Networking

Explore Related Categories

ServersRack ServersTower ServersBlade ServersStorageSAS & SATA HDDs