A9K-2T20GE-E, Cisco ASR 9000 Line Card, 2x10GE/20xGE/Req. XFPs & SFPs
Brand: Cisco · SKU: A9K-2T20GE-E · MPN: A9K-2T20GE-E · Category: Networking
$50,080.20
In Stock • 10 units
Cisco ASR 9000 Line Card A9K-2T20GE-E 2-Port 10GE, 20-Port GE Extended LC, Req. XFPs and SFPs
Specifications
| OA&M | - Ethernet OA&M (EOAM) IEEE 802.3ah: Physical-link OA&M for monitoring link health and assisting in fault isolation; works with IEEE 802.1ag for fast link-failure detection and signaling. - EOAM IEEE 802.1ag: Ethernet Connectivity Fault Management (E-CFM) protocols and procedures to discover and verify paths through 802.1 bridges and LANs. - EOAM ITU Y.1731: Fault Management (FM) and Performance Monitoring (PM) to verify Ethernet networks and measure delay, latency, and loss for SLA support. - Ethernet LMI (E-LMI): Protocol between CE and PE on the UNI link to notify the CE of connectivity status and configuration of Ethernet services on the port. - MPLS OA&M: Supports LSP ping, LSP traceroute, and VCCV for MPLS OA&M. |
|---|---|
| Model | A9K-2T20GE-E |
| Memory | 4 GB DRAM |
| Weight | kg |
| Options | Available as low queue, base, or extended line card. |
| Policers | 256,000 - 512,000 |
| Security | - Cisco IOS XR Software: Provides ACLs, control-plane protection, routing authentication, AAA and TACACS+, SSH, SNMPv3, and advanced RPL support. - Layer 2 ACLs: Filters packets under an EVC based on MAC addresses. - Layer 3 ACLs: Matches IPv4 packets based on Layer 3 attributes. - Additional security features: 802.1ad L2CP and BPDU filtering; MAC limiting per EFP or bridge domain; unicast, multicast, and broadcast storm-control on any interface or port; Unknown Unicast Flood Blocking (UUFB); DHCP snooping; URPF; control-plane security; Dynamic ARP Inspection (DAI); and IP Source Guard (IPSG). |
| Multicast | - IPv4 Multicast: Supports IGMPv2/v3, PIM-SSM, PIM-SM, PIM SSM Mapping, MSDP, Multicast VPN, and Anycast RP. - IGMP v2 and v3 snooping: Layer 2 snooping on VLAN or pseudowire level, summarizing joins upstream so only watched channels are sent downstream, ideal for broadband video deployments. |
| MPLS L3VPN | - MPLS L3VPN: Scalable IPv4 Layer 3 VPN backbone services for IP VPNs, supporting value-added services such as applications, data hosting, e-commerce, and telephony for business customers. - Carrier supporting carrier (CSC): Allows an MPLS VPN provider to use another backbone while maintaining private address space for customer VPNs, per IETF RFC 4364. - Selective VRF Download: Downloads VRF FIB entries only to line cards with VRF membership to increase chassis FIB scale and avoid unnecessary entries. - 6PE and 6VPE: Introduce IPv6 from the edge over an IPv4/MPLS backbone without IPv6 addressing restrictions, minimizing risk and operational cost. |
| Part Number | A9K-2T20GE-E |
| Connectivity | 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps IEEE 802.3 Ethernet |
| Total queues | 376,000 - 512,000 |
| EMC standards | Designed to meet FCC Class A; ICES-003 Class A; AS/NZS 3548 Class A; CISPR 22 (EN 55022) Class A; VCCI Class A; BSMI Class A; IEC/EN 61000-3-2 Power Line Harmonics; IEC/EN 61000-3-3 Voltage Fluctuations and Flicker; EN 50121-4 Railway EMC. |
| Manageability | - Cisco IOS XR manageability: Modular CLI, SNMP, Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP), and native XML interfaces. - Smart Call Home (SCH): Proactive support that detects and reports issues before they affect services for faster troubleshooting and resolution. - Cisco Active Network Abstraction (ANA): Vendor-neutral management framework that discovers and tracks network elements in near real time, aggregating VNEs into a virtual network and offering simplified OSS integration, a common resource management infrastructure, and consistent procedures and interfaces. |
| ETSI standards | Designed to meet EN 300 386 Telecommunications Network Equipment (EMC); ETSI 300 019 Storage Class 1.1; ETSI 300 019 Transportation Class 2.3; ETSI 300 019 Stationary Use Class 3.1; EN 55022 Information Technology Equipment (Emissions); EN 55024 Information Technology Equipment (Immunity); EN 50082-1 / EN 61000-6-1 Generic Immunity Standard. |
| L2VPN services | - Virtual Private LAN Services (VPLS): Connects multiple sites in a single bridged domain over an IP/MPLS network, presenting a simple Ethernet interface and allowing flexible bandwidth not tied to physical ports. - Hierarchical VPLS (HVPLS): Adds hierarchy at the VPLS edge for scale; supports QinQ access and Ethernet over MPLS (pseudowire) access. - Virtual Private Wire Service (VPWS) with Ethernet over MPLS (EoMPLS): Transports Ethernet frames over an MPLS core using pseudowires from EFPs or whole ports to remote interfaces or subinterfaces. - Pseudowire redundancy: Defines backup pseudowires to protect primary pseudowires on failure. - G.8032: Sub-50 ms protection for Ethernet traffic in ring topologies, compliant with ITU-T G.8032 v2 on Cisco ASR 9000 Series. - Multisegment pseudowire stitching: Interworks two pseudowires to form a cross-connect relationship. |
| Layer 3 routing | - IPv4 routing: Supports BGP, IS-IS, OSPF, RIP, static routes, IPv4 Multicast, Routing Policy Language (RPL), HSRP, and VRRP. - IPv6 routing: Supports OSPFv3, IS-IS, VRRPv6, DHCPv6 relay, and static IPv6 routing. - BGP PIC: BGP Prefix Independent Convergence for fast BGP route convergence. |
| Safety standards | Designed to meet UL/CSA/IEC/EN 60950-1; IEC/EN 60825 Laser Safety; ACA TS001; AS/NZS 60950; FDA Code of Federal Regulations Laser Safety. |
| Card weight range | 14 - 19 lb (6.35 - 8.62 kg) |
| High availability | - MPLS TE-FRR: Provides Layer 3 protection switching and temporary rerouting around failed links, nodes, or paths for MPLS LSPs. - Bidirectional Forwarding Detection (BFD): Fast forwarding-path failure detection for all media, encapsulations, topologies, and routing protocols. - IEEE 802.3ad Link Aggregation Bundles: Bundles multiple links for resiliency and load balancing across member links. - Multichassis Link Aggregation Group (MC-LAG): Standards-based 802.3ad bundle to a pair of Cisco ASR 9000 routers that appear as a single router, with rapid restoration on link or node failure, supporting business L2VPN, L3VPN, residential backhaul, mobile aggregation, and service provider edge. |
| Power consumption | Maximum 350 W - 630 W (depending on card type); typical 310 W - 565 W (depending on card type) |
| Immunity standards | Designed to meet IEC/EN 61000-4-2 Electrostatic Discharge Immunity (8 kV contact, 15 kV air); IEC/EN 61000-4-3 Radiated Immunity (10 V/m); IEC/EN 61000-4-4 Electrical Fast Transient Immunity (2 kV power, 1 kV signal); IEC/EN 61000-4-5 Surge AC Port (4 kV CM, 2 kV DM); IEC/EN 61000-4-5 Signal Ports (1 kV); IEC/EN 61000-4-5 Surge DC Port (1 kV); IEC/EN 61000-4-6 Immunity to Conducted Disturbances (10 Vrms); IEC/EN 61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m); IEC/EN 61000-4-11 Voltage dips, short interruptions, and voltage variations; EN 50121-4 Railway EMC. |
| Operating altitude | -60 to 4000 m (up to 2000 m conforms to IEC, EN, UL, and CSA 60950 requirements) |
| Product Description | 2-Port 10GE, 20-Port GE High Queue Combo Line Card, requires XFPs for 10GE, SFPs for GE |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this A9K-2T20GE-E, Cisco ASR 9000 Line Card, 2x10GE/20xGE/Req. XFPs & SFPs (A9K-2T20GE-E) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This A9K-2T20GE-E, Cisco ASR 9000 Line Card, 2x10GE/20xGE/Req. XFPs & SFPs includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the A9K-2T20GE-E, Cisco ASR 9000 Line Card, 2x10GE/20xGE/Req. XFPs & SFPs compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the A9K-2T20GE-E.
More in Networking
- A9K-2X100GE-SE, Cisco ASR 9000 Router Linecard, 2x100GE/Service Edge/Spare
- A9K-2X100GE-TR, Cisco ASR 9000 Router Linecard, 2x100GE/Packet Transport/Optimized LC
- A9K-40GE-B, Cisco ASR 9000 Line Card, 40xGE/Requires SFPs/High-density
- A9K-40GE-E, Cisco ASR 9000 Line Card, 40xGE Ports/Extended Line Card/SFP Required
- A9K-24X10GE-TR, Cisco ASR 9000 Router Linecard, 24x10GE ports/Packet optimized/Spares
- A9K-24X10GE-SE, Cisco ASR 9000 Router Linecard, 24x10GE ports/Service Edge/Spare
- A9K-24X10GE-1G-TR, Cisco ASR 9000 Router, 24x10GE/1GE dual rate/Line Card
- A9K-24X10GE-1G-SE, Cisco ASR 9000 Router, 24x10GE/1GE dual rate/SE LC