C9120AXI-T, Cisco Catalyst 9120AX Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal Antenna
SKU: C9120AXI-T · MPN: C9120AXI-T · Category: Networking
Specifications
| 802.11ac | • 4x4 downlink MU-MIMO with four spatial streams • MRC • 802.11ac beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support |
|---|---|
| 802.11ax | • 4x4 downlink MU-MIMO with four spatial streams • Uplink/downlink OFDMA • TWT • BSS coloring • MRC • 802.11ax beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support |
| Software | • Cisco Unified Wireless Network Software Release 8.9.x or later • Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later |
| Warranty | Limited lifetime hardware warranty |
| Interfaces | • 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz • Management console port (RJ-45) • USB 2.0 @ 3.75W (enabled via future software) |
| Description | Cisco Catalyst 9120AXI Series, T Domain |
| I ndicators | • Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Environmental | Cisco Catalyst 9120AXI • Nonoperating (storage) temperature: -22 ° to 158 ° F (-30 ° to 70 ° C) • Nonoperating (storage) altitude test: 25 ˚ C, 15,000 ft. • Operating temperature: 32 ° to 122 ° F (0 ° to 50 ° C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40 ˚ C, 9843 ft. Note: When the ambient operating temperature exceeds 40 ° C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled Cisco Catalyst 9120AXE and 9120AXP • Nonoperating (storage) temperature: -22 ° to 158 ° F (-30 ° to 70 ° C) • Nonoperating (storage) altitude test: 25 ˚ C, 15,000 ft. • Operating temperature: -4 ° to 122 ° F (-20 ° to 50 ° C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40 ˚ C, 9843 ft. |
| System memory | • 2048 MB DRAM • 1024 MB flash |
| Integrated antenna | Flexible radio (either on 2.4GHz or on 5GHz) • 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth • 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth Dedicated 5GHz radio • 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| Dimensions (W x L x H) | • Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7" (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0" (21.6 x 21.6 x 5.1 cm) |
| Smart Antenna Connector | • Available on the 9120E and on the 9120P only • Compact multi RF connector with DART interface • Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector • Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio |
| Input power requirements | • 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ® ) • Cisco power injector, AIR-PWRINJ6= • 802.3af PoE • Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| Available transmit power settings | 2.4 GHz • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1dBm (0.79mW) • -4dBm(0.39mW) 5 GHz • 26 dBm (400 mW) • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1dBm (0.79mW) |
| External antenna (sold separately) | • Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) • Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna • Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios • Supports Self-Identifiable Antennas (SIA) on one RP-TNC port |
| Supported wireless LAN controllers | • Cisco Catalyst 9800 Series Wireless Controllers • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| Frequency band and 20-MHz operating channels | T (T regulatory domain): • 2.412 to 2.462 GHz; 11 channels • 5.180 to 5.320 GHz; 8 channels • 5.500 to 5.700 GHz; 12 channels • 5.745 to 5.850 GHz; 7 channels |
| 802.11n version 2.0 (and related) capabilities | • 4x4 MIMO with four spatial streams • Maximal Ratio Combining (MRC) • 802.11n and 802.11a/g beamforming • 20- and 40-MHz channels • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 Dynamic Frequency Selection (DFS) • Cyclic Shift Diversity (CSD) support |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this C9120AXI-T, Cisco Catalyst 9120AX Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal Antenna (C9120AXI-T) is 100% genuine OEM hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This C9120AXI-T, Cisco Catalyst 9120AX Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the C9120AXI-T, Cisco Catalyst 9120AX Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal Antenna compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the C9120AXI-T.
More in Networking
- C9120AXI-Z, Cisco Catalyst 9120AX Access Point, Wi-Fi 6/4x4:4 MIMO/Internal antennas
- C9120AXP-A, Cisco Catalyst 9120 Access Point, Wi-Fi 6, MU-MIMO, 5Gbps
- C9120AXP-B, Cisco Catalyst 9120 Access Point, Wi-Fi 6/4x4 MU-MIMO/5Gbps
- C9120AXP-D, Cisco Catalyst 9120 Series Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal Antenna
- C9120AXI-S, Cisco Catalyst 9120AX Access Point, Wi-Fi 6/4x4:4 MIMO/Internal Antenna
- C9120AXI-R, Cisco Catalyst 9120AX Series Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal antenna
- C9120AXI-Q, Cisco Catalyst 9120AX Access Point, Wi-Fi 6/4x4:4 MIMO/Internal Antenna
- C9120AXI-N, Cisco Catalyst 9120AX Series Access Point, Wi-Fi 6, 4x4 MU-MIMO, Internal Antenna