AIRAP1832I-ZK910C, Cisco Aironet 1830 Series Access Point, Dual-band Wi-Fi/2x2 MIMO/10-pack
Brand: Cisco · SKU: AIRAP1832I-ZK910C · MPN: AIRAP1832I-ZK910C · Category: Networking
Request for Quote
In Stock • 10 units
Cisco Aironet 1830 Series 10-pack with Mobility Expre, Z Regulatory Domain
Specifications
| Model | AIRAP1832I-ZK910C |
|---|---|
| Weight | 3.12 kg |
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) |
| Power draw | 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. |
| Description | Cisco Aironet 1830 Series 10-pack with Mobility Express, 802.11ac Wave 2 AP, 3x3:2, Internal Antenna, Z Regulatory Domain 鈽?Model number ending in C is, by default, factory-shipped with a Cisco Mobility Express software image. |
| Environmental | Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25藲C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40藲C, 9843 ft. |
| System memory | 1GB DRAM 256MB flash |
| Deployment modes | Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh |
| Powering options | 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. |
| Regulatory Domain | Z (Z regulatory domain): - 2.412 to 2.462GHz; 11 channels - 5.180 to 5.320GHz; 8 channels - 5.500 to 5.700GHz; 8 channels (excludes 5.600 to 5.640GHz) - 5.745 to 5.825GHz; 5 channels |
| Integrated antenna | 2.4GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° |
| Dimensions (W x L x H) | Access point (without mounting bracket): 8.3 x 8.3 x 2in. (210.8 x 210.8 x 50.8mm) |
| Input power requirements | AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz |
| 802.11ac Wave 1 and 2 capabilities | 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867Mbps (80MHz in 5GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support |
| Supported wireless LAN controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express |
| 802.11n version 2.0 (and related) capabilities | 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300Mbps (40MHz with 5GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIRAP1832I-ZK910C, Cisco Aironet 1830 Series Access Point, Dual-band Wi-Fi/2x2 MIMO/10-pack (AIRAP1832I-ZK910C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIRAP1832I-ZK910C, Cisco Aironet 1830 Series Access Point, Dual-band Wi-Fi/2x2 MIMO/10-pack includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIRAP1832I-ZK910C, Cisco Aironet 1830 Series Access Point, Dual-band Wi-Fi/2x2 MIMO/10-pack compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIRAP1832I-ZK910C.
More in Networking
- AIR-AP1832I-Z-K9C, Cisco Aironet 1830 Series Access Point, 802.11ac Wave 2/2x2 MIMO/Z Domain
- AIR-AP1832I-Z-K9, Cisco AIR-AP1830 Series Access Point, 802.11ac Wave 2/3x3:2 MIMO/Internal Antenna
- AIR-AP1840I-A-K9, Cisco Aironet 1840I Series Access Point, 802.11ac Wave 2/2x2 MIMO/A domain
- AIR-AP1840I-B-K9C, Cisco Aironet 1840 Series Access Point, 802.11ac Wave2/2x2 MIMO/Gigabit Ethernet
- AIR-AP1832I-T-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/3x3:2 MIMO/Internal Antenna
- AIR-AP1832I-T-K9C, Cisco Aironet 1830 Access Point, 802.11ac Wave 2/Mobility Express/T Domain
- AIRAP1832I-TK910C, Cisco Aironet 1830 Series Access Point, 802.11ac Wave2/2x2 MU-MIMO/10-pack
- AIR-AP1832I-S-K9, Cisco AIR-AP1832I, Wireless Access Point, 802.11ac Wave 2/3x3:2 MIMO/Internal Antenna