Brand: Cisco · SKU: AIR-AP1832I-T-K9C · MPN: AIR-AP1832I-T-K9C · Category: Networking

Cisco Aironet 1830 Series with Mobility Expre, T Regulatory Domain
| Model | AIR-AP1832I-T-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Aironet 1830 Series Access Points. |
| Indicators | Status LED shows boot loader, association, operation status, warnings, and errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45, PoE), management console port (RJ-45), USB 2.0 (future software enabled) |
| Power Draw | 15.4 W. Note: Power drawn from PoE equipment may be higher based on cable length. |
| Description | 802.11ac Wave 2 access point, 3x3:2 MIMO, internal antenna, T regulatory domain. Model number ending with C is factory-shipped with Cisco Mobility Express. |
| Environmental | Nonoperating temperature: -22° to 158°F (-30° to 70°C); nonoperating altitude: 25°C, 15,000 ft; operating temperature: 32° to 104°F (0° to 40°C); operating humidity: 10% to 90% (noncondensing); operating altitude: 40°C, 9,843 ft |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized, standalone, sniffer, Cisco FlexConnect™, monitor, OfficeExtend, mesh |
| Powering Options | 802.3af/802.3at, Enhanced PoE, Cisco local power supply (AIR-PWR-C=), Cisco power injector (AIR-PWRINJ5= supports 802.3af only, AIR-PWRINJ6=). Note: If powered by 802.3af PoE, USB port is disabled. |
| Regulatory Domain | T domain: 2.412–2.462 GHz, 11 channels; 5.280–5.320 GHz, 3 channels; 5.500–5.700 GHz, 8 channels (excludes 5.600–5.640 GHz) |
| Integrated Antenna | 2.4 GHz: 3 dBi, internal omni, 360° horizontal beamwidth; 5 GHz: 5 dBi, internal omni, 360° horizontal beamwidth |
| 802.11n Capabilities | 3x3 MIMO with 2 spatial streams, maximal ratio combining (MRC), 20- and 40-MHz channels, PHY data rates up to 300 Mbps (40 MHz, 5 GHz), packet aggregation (A-MPDU/A-MSDU, Tx/Rx), dynamic frequency selection (DFS), cyclic shift diversity (CSD) |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) without mounting bracket |
| Input Power Requirements | AP1830: 44–57 VDC; power supply & injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 3x3 MIMO with 2 spatial streams, single-user or multiuser MIMO, MRC, 802.11ac beamforming, 20-, 40-, and 80-MHz channels, PHY data rates up to 867 Mbps (80 MHz, 5 GHz), packet aggregation (A-MPDU/A-MSDU, Tx/Rx), DFS, CSD support |
| Supported Wireless LAN Controllers | Cisco 2500 Series, Wireless Controller Module for ISR G2, WiSM2 for Catalyst 6500 Series Switches, 5500 Series, 5520 Series, Flex 7500 Series, 8500 Series, 8540 Series, 5760 Wireless LAN Controller, Catalyst 3650/3850 Switches with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1832I-T-K9C, Cisco Aironet 1830 Access Point, 802.11ac Wave 2/Mobility Express/T Domain (AIR-AP1832I-T-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1832I-T-K9C, Cisco Aironet 1830 Access Point, 802.11ac Wave 2/Mobility Express/T Domain includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1832I-T-K9C.