Brand: Cisco · SKU: AIR-AP1852I-Z-K9C · MPN: AIR-AP1852I-Z-K9C · Category: Networking

802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, Z Regulatory Domain, Configurable
| Model | AIR-AP1852I-Z-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED indicates boot loader status, association, operating status, warnings, and errors |
| Interfaces | 1 x 10/100/1000BASE-T (RJ-45), PoE; 1 x 10/100/1000BASE-T (RJ-45), AUX for Link Aggregation; management console port (RJ-45); USB 2.0 (enabled via future software) |
| Power Draw | 20.9 W. Note: Power drawn from PoE source may be higher depending on cable length |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, Z Regulatory Domain. Model number ending in C is factory-shipped with a Cisco Mobility Express software image. |
| Environmental | Nonoperating (storage) temperature: -30°C to 70°C (-22°F to 158°F). Nonoperating (storage) altitude: up to 15,000 ft at 25°C. Operating temperature: 0°C to 40°C (32°F to 104°F). Operating humidity: 10% to 90% (noncondensing). Operating altitude: up to 9,843 ft at 40°C. |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector (AIR-PWRINJ4=), Cisco local power supply (AIR-PWR-C=), Cisco injector (AIR-PWRINJ5=, supports 802.3af only), 802.3af. Note: With 802.3af PoE, 2.4-GHz radio on 1852e shifts to 2x3, USB and AUX Ethernet ports disabled on 1852i/1852e. |
| Regulatory Domain | Z (Z regulatory domain): 2.412–2.462 GHz; 3 channels. 5.180–5.320 GHz; 8 channels. 5.500–5.700 GHz; 8 channels (excludes 5.600–5.640 GHz). 5.745–5.825 GHz; 5 channels. |
| Integrated Antenna | 2.4 GHz: 3 dBi gain, internal omni, 360° horizontal beamwidth; 5 GHz: 5 dBi gain, internal omni, 360° horizontal beamwidth |
| 802.11n Capabilities | 4x4 MIMO with 4 spatial streams, maximal ratio combining, 20/40 MHz channels, PHY data rates up to 600 Mbps (40 MHz with 5 GHz), packet aggregation (A-MPDU/A-MSDU Tx/Rx), 802.11 DFS, cyclic shift diversity support |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm), without mounting bracket |
| Input Power Requirements | 44–57 VDC (AP1850); power supply and injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO with four spatial streams (single-user), 4x4 MIMO with three spatial streams (multiuser), MRC, 802.11ac beamforming, 20/40/80 MHz channels, up to 1.7 Gbps (80 MHz in 5 GHz), packet aggregation (A-MPDU/A-MSDU Tx/Rx), 802.11 DFS, CSD support, rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for Catalyst 6500, Cisco 5500, Flex 7500, 8500, 5760, Catalyst 3650/3850 Series with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852I-Z-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 (AIR-AP1852I-Z-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852I-Z-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-Z-K9C.