AIR-AP1852I-Q-K9, Cisco AIR-AP1852I Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
Brand: Cisco · SKU: AIR-AP1852I-Q-K9 · MPN: AIR-AP1852I-Q-K9 · Category: Networking
802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, Q Regulatory Domain
Specifications
| Model | AIR-AP1852I-Q-K9 |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED shows boot loader, association, operation, warnings, and errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE); 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (for Link Aggregation); Management console port (RJ-45); USB 2.0 (enabled via future software) |
| Power Draw | 20.9 W Note: When using Power over Ethernet (PoE), the actual power drawn depends on cable length. |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, Q Regulatory Domain |
| Environmental | Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C); Nonoperating altitude test: 25°C, 15,000 ft.; Operating temperature: 32° to 104°F (0° to 40°C); Operating humidity: 10% to 90% (noncondensing); Operating altitude test: 40°C, 9,843 ft. |
| System Memory | 1 GB DRAM; 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector (AIR-PWRINJ4=), Cisco local power supply (AIR-PWR-C=), Cisco power injector (AIR-PWRINJ5=, 802.3af only), 802.3af Note: With 802.3af PoE, the 1852e 2.4-GHz radio shifts to 2x3 from 3x4. USB and AUX Ethernet ports are disabled on 1852i and 1852e. |
| Regulatory Domain | Q (Q regulatory domain): - 2.412 to 2.472 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.500 to 5.700 GHz; 11 channels |
| Integrated Antenna | 2.4 GHz: 3 dBi gain, internal omni, 360° horizontal beamwidth 5 GHz: 5 dBi gain, internal omni, 360° horizontal beamwidth |
| 802.11n Capabilities | 4x4 MIMO with four spatial streams; Maximal ratio combining (MRC); 20- and 40-MHz channels; PHY data rates up to 600 Mbps (40 MHz with 5 GHz); Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx); 802.11 dynamic frequency selection (DFS); Cyclic shift diversity (CSD) support |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm), without mounting bracket |
| Input Power Requirements | AP1850: 44 to 57 VDC; Power supply and power injector: 100 to 240 VAC, 50 to 60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO (four spatial streams, single-user MIMO); 4x4 MIMO (three spatial streams, multiuser MIMO); MRC; 802.11ac beamforming (transmit); 20-, 40-, 80-MHz channels; PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz); A-MPDU/A-MSDU aggregation; 802.11 DFS; CSD support; Rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIR-AP1852I-Q-K9, Cisco AIR-AP1852I Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 (AIR-AP1852I-Q-K9) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIR-AP1852I-Q-K9, Cisco AIR-AP1852I Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIR-AP1852I-Q-K9, Cisco AIR-AP1852I Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-Q-K9.
More in Networking
- AIRAP1852I-RK910C, Cisco Aironet 1850i Access Point, 2x2 MU-MIMO/802.11ac Wave 2/10-pack
- AIR-AP1852I-R-K9C, Cisco AIR-AP1850 Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-R-K9, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-SK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave2/4x4 MU-MIMO/Mobility Express
- AIR-AP1852I-Q-K9C, Cisco AIR-AP1852I, 802.11ac Wave 2 Access Point, 4x4:4 MIMO, Internal Antenna, Q Domain
- AIRAP1852I-QK910C, Cisco Aironet 1850i Access Point, 802.11ac Wave2/2x2 MU-MIMO/10-pack
- AIR-AP1852I-N-K9, Cisco AIR-AP1852 Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
- AIR-AP1852I-N-K9C, Cisco AIR-AP1800 Series Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna