Brand: Cisco · SKU: AIR-AP1852I-N-K9C · MPN: AIR-AP1852I-N-K9C · Category: Networking

802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, N Regulatory Domain, Configurable
| Model | AIR-AP1852I-N-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED indicates boot loader status, association status, operating status, warnings, and errors |
| Interfaces | 1 x 10/100/1000BASE-T (RJ-45, PoE), 1 x 10/100/1000BASE-T AUX (used for link aggregation), Management console port (RJ-45), USB 2.0 (enabled via future software) |
| Power Draw | 20.9 W Note: Power drawn from the PoE source will be higher depending on cable length. |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, N Regulatory Domain Model number ending in C is factory-shipped with a Cisco Mobility Express software image by default. |
| Environmental | Nonoperating temperature: -30°C to 70°C (-22°F to 158°F) Nonoperating altitude: 25°C, 15,000 ft. Operating temperature: 0°C to 40°C (32°F to 104°F) Operating humidity: 10% to 90% (non-condensing) Operating altitude: 40°C, 9,843 ft. |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco injector AIR-PWRINJ4=, Cisco local power AIR-PWR-C=, Cisco injector AIR-PWRINJ5= (802.3af only), 802.3af Note: On 802.3af power, 1852e 2.4-GHz radio shifts to 2x3 from 3x4. The USB and AUX Ethernet ports are disabled on both 1852i and 1852e. |
| Regulatory Domain | N Domain: 2.412–2.462 GHz (3 channels) 5.180–5.320 GHz (8 channels) 5.745–5.825 GHz (5 channels) |
| Integrated Antenna | 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) (without mounting bracket) |
| Input Power Requirements | 44 to 57 VDC; Power supply and injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1/2 Capabilities | 4x4 MIMO with 4 spatial streams, single-user MIMO; 4x4 MIMO with 3 spatial streams, multiuser MIMO; MRC, 802.11ac beamforming, 20/40/80 MHz channels, PHY rates up to 1.7 Gbps (80 MHz in 5 GHz), Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), 802.11 DFS, CSD support, rogue device detection |
| 802.11n Version 2.0 Capabilities | 4x4 MIMO with 4 spatial streams, Maximal Ratio Combining (MRC), 20/40 MHz channels, PHY rates up to 600 Mbps (40 MHz in 5 GHz), Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), 802.11 DFS, Cyclic Shift Diversity (CSD) support |
| Supported Wireless LAN Controllers | Cisco 2500 Series, Cisco Wireless Controller Module for ISR G2, Cisco WiSM2 for Catalyst 6500, Cisco 5500 Series, Cisco Flex 7500 Series, Cisco 8500 Series, Cisco 5760 Series, Cisco Catalyst 3650/3850 Series with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852I-N-K9C, Cisco AIR-AP1800 Series Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna (AIR-AP1852I-N-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852I-N-K9C, Cisco AIR-AP1800 Series Access Point, 4x4:4 MIMO/802.11ac Wave 2/Internal Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-N-K9C.