AIR-AP1852I-E-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
Brand: Cisco · SKU: AIR-AP1852I-E-K9C · MPN: AIR-AP1852I-E-K9C · Category: Networking
802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, E Regulatory Domain, Configurable
Specifications
| Model | AIR-AP1852I-E-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for Aironet 1850 Series Access Points |
| Indicators | Status LED: boot loader, association, operation, warnings, errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), PoE 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (Link Aggregation) Management console port (RJ-45) USB 2.0 (future software enable) |
| Power Draw | 20.9 W When using PoE, power draw may increase depending on cable length. |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, E Regulatory Domain. Model numbers ending in C are factory-shipped with Cisco Mobility Express software image. |
| Environmental | Nonoperating temperature: -30°C to 70°C (-22°F to 158°F) Nonoperating altitude: 15,000 ft at 25°C Operating temperature: 0°C to 40°C (32°F to 104°F) Operating humidity: 10% to 90% (noncondensing) Operating altitude: 9,843 ft (40°C) |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco injector (AIR-PWRINJ4=), Cisco local supply (AIR-PWR-C=), Cisco injector (AIR-PWRINJ5=, supports 802.3af only), 802.3af. If powered by 802.3af PoE, 1852e 2.4 GHz radio shifts to 2x3; USB port and AUX Ethernet port disabled on 1852i/e. |
| Regulatory Domain | E regulatory domain: 2.412 to 2.472 GHz (3 channels), 5.180 to 5.320 GHz (8 channels), 5.500 to 5.700 GHz (8 channels, excludes 5.600–5.640 GHz) |
| Integrated Antenna | 2.4 GHz: 3 dBi gain, internal omni, 360° beamwidth 5 GHz: 5 dBi gain, internal omni, 360° beamwidth |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) (without mounting bracket) |
| Input Power Requirements | Access Point: 44 to 57 VDC Power supply & injector: 100–240 VAC, 50–60 Hz |
| 802.11n v2.0 Capabilities | 4x4 MIMO with four spatial streams, maximal ratio combining (MRC), 20/40 MHz channels, PHY data rates up to 600 Mbps (40 MHz, 5 GHz), A-MPDU and A-MSDU (Tx/Rx), 802.11 DFS, cyclic shift diversity (CSD) support |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO; four spatial streams, single-user MIMO; three spatial streams, multiuser MIMO; MRC; 802.11ac transmit beamforming; 20/40/80 MHz channels; PHY data rates up to 1.7 Gbps (80 MHz, 5 GHz); A-MPDU and A-MSDU (Tx/Rx); 802.11 DFS; CSD support; rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500, Wireless Controller Module for ISR G2, WiSM2 for Catalyst 6500, 5500, Flex 7500, 8500, 5760, Catalyst 3650/3850 with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIR-AP1852I-E-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 (AIR-AP1852I-E-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIR-AP1852I-E-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIR-AP1852I-E-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-E-K9C.
More in Networking
- AIR-AP1852I-E-K9, Cisco Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-EK9-RF, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-FK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave2/4x4 MU-MIMO/10-pack
- AIR-AP1852I-F-K9C, Cisco AIR Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIR-AP1852I-EK910, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-D-K9, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/802.11ac Wave 2/Internal Antenna
- AIR-AP1852I-D-K9C, Cisco Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIRAP1852I-DK910C, Cisco Aironet 1850 Series Access Point, 802.11ac Wave2/2x2 MIMO/D Reg Domain