Brand: Cisco · SKU: AIR-AP1852I-D-K9C · MPN: AIR-AP1852I-D-K9C · Category: Networking

802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, D Regulatory Domain, Configurable
| Model | AIR-AP1852I-D-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED shows boot loader status, association status, operating status, boot loader warnings and errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45) with PoE 1 x 10/100/1000BASE-T autosensing (RJ-45) AUX (for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software) |
| Power Draw | 20.9 W Note: Power draw via PoE depends on cable length |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, D Regulatory Domain. Model number ending in C is, by default, shipped with Cisco Mobility Express software image. |
| Environmental | Storage temperature: -30°C to 70°C (-22°F to 158°F) Storage altitude: 25°C, 15,000 ft. Operating temperature: 0°C to 40°C (32°F to 104°F) Operating humidity: 10% to 90% (noncondensing) Operating altitude: 40°C, 9,843 ft. |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector (AIR-PWRINJ4=), Cisco local power supply (AIR-PWR-C=), Cisco power injector (AIR-PWRINJ5=, 802.3af only), 802.3af Note: With 802.3af PoE, the 1852e 2.4 GHz radio will shift to 2x3 from 3x4, and the USB/AUX Ethernet ports are disabled on 1852i and 1852e. |
| Regulatory Domain | D regulatory domain: 2.412–2.462 GHz (3 channels), 5.180–5.320 GHz (8 channels), 5.745–5.825 GHz (5 channels) |
| Integrated Antenna | 2.4 GHz: 3 dBi gain, internal omni, 360° beamwidth 5 GHz: 5 dBi gain, internal omni, 360° beamwidth |
| 802.11n Capabilities | 4x4 MIMO, four spatial streams, maximal ratio combining (MRC), 20/40 MHz channels, PHY data rates up to 600 Mbps (40 MHz in 5 GHz), A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), dynamic frequency selection (DFS), cyclic shift diversity (CSD) support |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm) |
| Input Power Requirements | AP1850: 44–57 VDC Power supply/power injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO with four spatial streams (single-user MIMO), 4x4 MIMO with three spatial streams (multiuser MIMO), MRC, transmit beamforming, 20/40/80 MHz channels, PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz), A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), DFS, CSD support, Rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500, Flex 7500, 8500, 5760 Series Controllers, Catalyst 3650/3850 Series switch with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852I-D-K9C, Cisco Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 (AIR-AP1852I-D-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852I-D-K9C, Cisco Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2 includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-D-K9C.