Brand: Cisco · SKU: AIR-AP1852E-Q-K9 · MPN: AIR-AP1852E-Q-K9 · Category: Networking

802.11ac Wave 2 Access Point, 4x4:4, External-Ant, Q Regulatory Domain
| Model | AIR-AP1852E-Q-K9 |
|---|---|
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45, PoE), 1 x 10/100/1000BASE-T autosensing (RJ-45, AUX/Link Aggregation), Management console port (RJ-45), USB 2.0 (future software enabled) |
| Power Draw | 20.9 W (Power draw from PoE equipment may be higher depending on cable length) |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, External Antenna, Q Regulatory Domain |
| System Memory | 1 GB DRAM, 256 MB Flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector AIR-PWRINJ4=, Cisco local power supply AIR-PWR-C=, Cisco power injector AIR-PWRINJ5= (supports 802.3af only), 802.3af. Note: With 802.3af PoE, the 1852e 2.4-GHz radio is limited to 2x3 from 3x4 and the USB/AUX Ethernet ports are disabled. |
| Regulatory Domain | Q Regulatory Domain: 2.412–2.472 GHz (3 channels); 5.180–5.320 GHz (8 channels); 5.500–5.700 GHz (11 channels) |
| Status Indicators | Status LED for boot loader, association, operation, warnings, errors |
| 802.11n Capabilities | 4x4 MIMO (four spatial streams), MRC, 20/40 MHz channels, up to 600 Mbps PHY data rate (40 MHz, 5 GHz), Packet aggregation (A-MPDU, A-MSDU, Tx/Rx), DFS, CSD support |
| Software Requirements | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for Cisco Aironet 1850 Series Access Points |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm), without mounting bracket |
| Environmental Conditions | Storage temperature: -30°C to 70°C (-22°F to 158°F); Storage altitude: 25°C, 15,000 ft; Operating temperature: -20°C to 50°C (-4°F to 122°F); Operating humidity: 10%–90% noncondensing; Operating altitude: 40°C, 9,843 ft |
| External Antenna Support | Certified up to 6 dBi (2.4 GHz & 5 GHz); Cisco supplies broad antenna options for different deployments (antenna sold separately) |
| Input Power Requirements | AP1850: 44–57 VDC; Power supply and injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO (four spatial streams, SU-MIMO), 4x4 MIMO (three spatial streams, MU-MIMO), MRC, 802.11ac beamforming, 20/40/80 MHz channels, up to 1.7 Gbps (80 MHz, 5 GHz), Packet aggregation (A-MPDU, A-MSDU, Tx/Rx), DFS, CSD, Rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500 Series, Wireless Controller Module for ISR G2, WiSM2 for Catalyst 6500, 5500 Series, Flex 7500 Series, 8500 Series, 5760 Series, Catalyst 3650/3850 with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852E-Q-K9, Cisco AIR-AP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/External Antenna (AIR-AP1852E-Q-K9) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852E-Q-K9, Cisco AIR-AP1852E Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/External Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852E-Q-K9.