Brand: Cisco · SKU: AIR-AP1852E-N-K9 · MPN: AIR-AP1852E-N-K9 · Category: Networking

802.11ac Wave 2 Access Point, 4x4:4, External-Ant, N Regulatory Domain
| Model | AIR-AP1852E-N-K9 |
|---|---|
| Indicators | Status LED: boot loader status, association status, operating status, boot loader warnings and errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45, PoE) 1 x 10/100/1000BASE-T autosensing (RJ-45, AUX for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software) |
| Power Draw | 20.9W Note: PoE deployment may incur higher draw depending on cable length. |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, External Antenna, N Regulatory Domain |
| Environmental | Storage temperature: -30°C to 70°C (-22°F to 158°F) Storage altitude test: 25°C, 15,000 ft Operating temperature: -20°C to 50°C (-4°F to 122°F) Operating humidity: 10% to 90% noncondensing Operating altitude test: 40°C, 9,843 ft |
| System Memory | 1 GB DRAM, 256 MB Flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector (AIR-PWRINJ4=), Local power supply (AIR-PWR-C=), Cisco power injector (AIR-PWRINJ5=, supports 802.3af only), 802.3af Note: With 802.3af PoE, the 2.4 GHz radio shifts to 2x3, and USB/AUX ports are disabled on 1852e. |
| 802.11n Capabilities | 4x4 MIMO with four spatial streams, Maximal ratio combining (MRC), 20- and 40-MHz channels, PHY data rates up to 600 Mbps (40 MHz with 5 GHz), Packet aggregation (A-MPDU Tx/Rx, A-MSDU Tx/Rx), 802.11 DFS, Cyclic shift diversity (CSD) |
| Regulatory Domain (N) | 2.412–2.462 GHz (3 channels) 5.180–5.320 GHz (8 channels) 5.745–5.825 GHz (5 channels) |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm), without mounting bracket |
| Software Compatibility | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for Cisco Aironet 1850 Series Access Points |
| External Antenna Support | Certified for antenna gains up to 6 dBi (2.4 GHz and 5 GHz). Cisco provides a wide antenna selection for various deployments. |
| Input Power Requirements | AP1850: 44–57 VDC Power supply and injector: 100–240 VAC; 50–60 Hz |
| Supported Wireless LAN Controllers | Cisco 2500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series, Cisco 5500 Series Wireless Controllers, Flex 7500 Series, 8500 Series, 5760 Series, Catalyst 3650/3850 Series switch with integrated controller, Cisco Mobility Express |
| 802.11ac Wave 1 & Wave 2 Capabilities | 4x4 MIMO (four spatial streams, single-user), 4x4 MIMO (three spatial streams, multiuser), MRC, 802.11ac beamforming (transmit beamforming), 20-, 40-, 80-MHz channels, PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz), Packet aggregation (A-MPDU Tx/Rx, A-MSDU Tx/Rx), 802.11 DFS, CSD, Rogue device detection |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852E-N-K9, Cisco AIR-AP1852E, Access Point, 802.11ac Wave 2/4x4:4 MIMO/External-Ant (AIR-AP1852E-N-K9) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852E-N-K9, Cisco AIR-AP1852E, Access Point, 802.11ac Wave 2/4x4:4 MIMO/External-Ant includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852E-N-K9.