N5K-C56128P, Cisco Nexus 56128P Switch, 48x10G SFP+/4x40G QSFP+/2RU Chassis

Brand: Cisco · SKU: N5K-C56128P · MPN: N5K-C56128P · Category: Networking

N5K-C56128P, Cisco Nexus 56128P Switch, 48x10G SFP+/4x40G QSFP+/2RU Chassis
$14,007.92
In Stock • 10 units

Nexus 56128P Chassis, 2RU, 48x 10-Gbps SFP+, 4 x 40G QSFP+ Fixed Ports (Base)

Specifications

10 GEUp to 96 wire-rate ports
40 GEUp to 8 QSFP ports
ModelN5K-C56128P
Latency1 microsecond
Security鈼?nbsp; Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports 鈼?nbsp; Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc. 鈼?nbsp; Standard and extended Layer 3 and 4 ACLs: IPv4 and IPv6, Internet Control Message Protocol (ICMP and ICMPv6), TCP, User Datagram Protocol (UDP), etc. 鈼?nbsp; Ingress policing 鈼?nbsp; VLAN-based ACLs (VACLs) 鈼?nbsp; Port-based ACLs (PACLs) 鈼?nbsp; Named ACLs 鈼?nbsp; Optimized ACL distribution 鈼?nbsp; ACLs on virtual terminals (vtys) 鈼?nbsp; ACL logging (IPv4 only) 鈼?nbsp; Dynamic Host Configuration Protocol (DHCP) snooping with Option 82 鈼?nbsp; Dynamic ARP Inspection 鈼?nbsp; IP source guard 鈼?nbsp; DHCP relay (up to 32 destinations) 鈼?nbsp; Ethernet port security 鈼?nbsp; IPv6 RACL, PACL, and VACL 鈼?nbsp; iSCSI type-length-value (TLV)
Interfaces鈼?nbsp; 48 fixed 1/10 Gigabit Ethernet SFP+ ports with 4 x 40 Gigabit Ethernet QSFP+ fixed ports and 2 expansion slots 鈼?nbsp; Expansion module: 24 SFP+ unified ports plus 2 x 40 Gigabit Ethernet QSFP+ ports 鈼?nbsp; Conversion of 40 Gigabit Ethernet ports to 10 Gigabit Ethernet interfaces through QSFP+ breakout cable 鈼?nbsp; Fabric extension through the Cisco Nexus 2200 and 2300 platforms
Management鈼?nbsp; Switch management using 10/100/1000-Mbps management or console ports 鈼?nbsp; CLI-based console to provide detailed out-of-band management 鈼?nbsp; In-band switch management 鈼?nbsp; Port-based locator and beacon LEDs 鈼?nbsp; Configuration synchronization 鈼?nbsp; Configuration rollback 鈼?nbsp; Secure Shell Version 2 (SSHv2) 鈼?nbsp; Telnet 鈼?nbsp; Authentication, authorization, and accounting (AAA) 鈼?nbsp; AAA with RBAC 鈼?nbsp; RADIUS 鈼?nbsp; TACACS+ 鈼?nbsp; Syslog (8 servers) 鈼?nbsp; Embedded packet analyzer 鈼?nbsp; SNMPv1, v2, and v3 (IPv4 and IPv6) 鈼?nbsp; Enhanced SNMP MIB support 鈼?nbsp; XML (NETCONF) support 鈼?nbsp; Remote monitoring (RMON) 鈼?nbsp; Advanced Encryption Standard (AES) for management traffic 鈼?nbsp; Unified username and passwords across CLI and SNMP 鈼?nbsp; Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) 鈼?nbsp; Digital certificates for management between switch and RADIUS server 鈼?nbsp; Cisco Discovery Protocol Versions 1 and 2 鈼?nbsp; RBAC 鈼?nbsp; SPAN on physical, PortChannel and VLAN 鈼?nbsp; ERSPAN 鈼?nbsp; Ingress and egress packet counters per interface 鈼?nbsp; Network Time Protocol (NTP) 鈼?nbsp; Cisco Generic Online Diagnostics (GOLD) 鈼?nbsp; Comprehensive bootup diagnostic tests 鈼?nbsp; Cisco Embedded Event Manager (EEM) 鈼?nbsp; Cisco Call Home 鈼?nbsp; Cisco Smart Call Home 鈼?nbsp; Default Interface 鈼?nbsp; Cisco Fabric Manager 鈼?nbsp; Cisco Prime DCNM 鈼?nbsp; CiscoWorks LAN Management Solution (LMS)
Form factor2-rack unit
Performance鈼?nbsp; Layer 2 and 3 hardware forwarding at 2.56Tbps; 1904mpps (64-byte packets) 鈼?nbsp; Support for up to 256,000 combined entries of MAC addresses and Address Resolution Protocol (ARP) entries 鈼?nbsp; Low latency of approximately 1 microsecond using cut-through forwarding for predictable, consistent traffic latency regardless of packet size, traffic pattern, or features enabled on 10 and 40 Gigabit Ethernet interfaces 鈼?nbsp; 25-MB buffer per 12 x 10 Gigabit Ethernet SFP+ interfaces 鈼?nbsp; Line-rate traffic throughput on all ports in Layer 2 and 3 mode
Generic MIBs鈼?nbsp; SNMPv2-SMI 鈼?nbsp; CISCO-SMI 鈼?nbsp; SNMPv2-TM 鈼?nbsp; SNMPv2-TC 鈼?nbsp; IANA-ADDRESS-FAMILY-NUMBERS-MIB 鈼?nbsp; IANAifType-MIB 鈼?nbsp; IANAiprouteprotocol-MIB 鈼?nbsp; HCNUM-TC 鈼?nbsp; CISCO-TC 鈼?nbsp; SNMPv2-MIB 鈼?nbsp; SNMP-COMMUNITY-MIB 鈼?nbsp; SNMP-FRAMEWORK-MIB 鈼?nbsp; SNMP-NOTIFICATION-MIB 鈼?nbsp; SNMP-TARGET-MIB 鈼?nbsp; SNMP-USER-BASED-SM-MIB 鈼?nbsp; SNMP-VIEW-BASED-ACM-MIB 鈼?nbsp; CISCO-SNMP-VACM-EXT-MIB
Layer 3 MIBs鈼?nbsp; UDP-MIB 鈼?nbsp; TCP-MIB 鈼?nbsp; OSPF-MIB 鈼?nbsp; BGP4-MIB 鈼?nbsp; CISCO-HSRP-MIB
Ethernet MIBs鈼?nbsp; CISCO-VLAN-MEMBERSHIP-MIB 鈼?nbsp; CISCO-Virtual-Interface-MIB 鈼?nbsp; CISCO-VTP-MIB
NVGRE capableYes
Security MIBs鈼?nbsp; CISCO-AAA-SERVER-MIB 鈼?nbsp; CISCO-AAA-SERVER-EXT-MIB 鈼?nbsp; CISCO-COMMON-ROLES-MIB 鈼?nbsp; CISCO-COMMON-MGMT-MIB 鈼?nbsp; CISCO-RADIUS-MIB 鈼?nbsp; CISCO-SECURE-SHELL-MIB 鈼?nbsp; TCP/IP MIBs 鈼?nbsp; INET-ADDRESS-MIB 鈼?nbsp; TCP-MIB 鈼?nbsp; CISCO-TCP-MIB 鈼?nbsp; UDP-MIB 鈼?nbsp; IP-MIB 鈼?nbsp; CISCO-IP-PROTOCOL-FILTER-MIB 鈼?nbsp; CISCO-DNS-CLIENT-MIB 鈼?nbsp; CISCO-PORTSECURITY-MIB
Unified portsUp to 48 ports (Ethernet; FCoE; 2/4/8-gigabit FC)
Hardware VXLANYes
Expansion slots2
Monitoring MIBs鈼?nbsp; DIFFSERV-DSCP-TC 鈼?nbsp; NOTIFICATION-LOG-MIB 鈼?nbsp; DIFFSERV-MIB 鈼?nbsp; CISCO-CALLHOME-MIB 鈼?nbsp; CISCO-SYSLOG-EXT-MIB 鈼?nbsp; CISCO-PROCESS-MIB 鈼?nbsp; RMON-MIB 鈼?nbsp; CISCO-RMON-CONFIG-MIB 鈼?nbsp; CISCO-HC-ALARM-MIB 鈼?nbsp; LLDP-MIB
Number of ports1152 with FEX
Layer 2 Features鈼?nbsp; Layer 2 switch ports and VLAN trunks 鈼?nbsp; IEEE 802.1Q VLAN encapsulation 鈼?nbsp; Support for up to 4000 VLANs 鈼?nbsp; Support for up to 4000 access control list (ACL) entries 鈼?nbsp; Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible) 鈼?nbsp; Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s): 64 instances 鈼?nbsp; Spanning Tree PortFast 鈼?nbsp; Spanning Tree root guard 鈼?nbsp; Spanning Tree Bridge Assurance 鈼?nbsp; Cisco EtherChannel technology (up to 16 ports per EtherChannel) 鈼?nbsp; Cisco vPC technology 鈼?nbsp; vPC configuration synchronization 鈼?nbsp; vPC shutdown 鈼?nbsp; Link Aggregation Control Protocol (LACP): IEEE 802.3ad 鈼?nbsp; Advanced port-channel hashing based on Layer 2, 3, and 4 information 鈼?nbsp; Jumbo frames on all ports (up to 9216 bytes) 鈼?nbsp; Pause frames (IEEE 802.3x) 鈼?nbsp; Storm control (unicast, multicast, and broadcast) 鈼?nbsp; Private VLANs 鈼?nbsp; Private VLAN over trunks (isolated and promiscuous) 鈼?nbsp; Private VLANs over vPC and EtherChannels 鈼?nbsp; VLAN remapping 鈼?nbsp; FabricPath 鈼?nbsp; EvPC and vPC+ with FabricPath 鈼?nbsp; Adapter FEX 鈼?nbsp; Data Center VM-FEX 鈼?nbsp; Support for up to 24 fabric extenders (Layer 2) with each Cisco Nexus 5672UP, 5672UP-16G, and 56128P Switch 鈼?nbsp; RDMA over Converged Ethernet (RoCE) using Data Center Bridging (DCB) support (DCB Exchange [DCBX] no drop and priority flow control [PFC])
Layer 3 Features鈼?nbsp; Layer 3 interfaces: Routed ports, switch virtual interface (SVI), port channels, subinterfaces, and port-channel subinterfaces 鈼?nbsp; Support for up to 32,000 IPv4 and 8000 IPv6 host prefixes 鈼?nbsp; Support for up to 8000 multicast routes (IPv4) 鈼?nbsp; Support for up to 8000 IGMP snooping groups 鈼?nbsp; Support for 4000 Virtual Routing and Forwarding (VRF) entries 鈼?nbsp; Support for up to 4096 VLANs 鈼?nbsp; Equal-Cost Multipathing (ECMP) up to 64 ways 鈼?nbsp; 4000 flexible ACL entries 鈼?nbsp; Routing protocols: Static, Routing Information Protocol Version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First Version 2 (OSPFv2), Border Gateway Protocol (BGP), and Intermediate System-to-Intermediate System (IS-IS) 鈼?nbsp; IPv6 routing protocols: Static, OPFv3, BGPv6, and EIGRPv6 鈼?nbsp; IPv6 VRF-lite 鈼?nbsp; BFD support: OSPFv2, BGPv4, EIGRP, and VRF instances 鈼?nbsp; Policy-Based Routing (IPv4 and IPv6) 鈼?nbsp; Hot-Standby Router Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) 鈼?nbsp; IP direct broadcast 鈼?nbsp; vPC+ routing protocol peering 鈼?nbsp; ACL: Routed ACL with Layer 3 and 4 options to match ingress and egress ACL 鈼?nbsp; Multicast: Protocol Independent Multicast Version 2 (PIMv2) sparse mode, Source-Specific Multicast (SSM), Bidir-PIM, Multicast Source Discovery Protocol (MSDP), IGMPv2 and v3, and Multicast VLAN Registration (MVR) 鈼?nbsp; VRF: VRF-lite (IP VPN); VRF-aware unicast; and BGP-, OSPF-, RIP-, and VRF-aware multicast 鈼?nbsp; Unicast Reverse-Path Forwarding (uRFP) with ACL; strict and loose modes 鈼?nbsp; Jumbo frame support (up to 9216 bytes) 鈼?nbsp; Support for up to 24 fabric extenders on each Cisco Nexus 5600 10-Gbps platform switch
Configuration MIBs鈼?nbsp; ENTITY-MIB 鈼?nbsp; IF-MIB 鈼?nbsp; CISCO-ENTITY-EXT-MIB 鈼?nbsp; CISCO-ENTITY-FRU-CONTROL-MIB 鈼?nbsp; CISCO-ENTITY-SENSOR-MIB 鈼?nbsp; CISCO-FLASH-MIB 鈼?nbsp; CISCO-SYSTEM-MIB 鈼?nbsp; CISCO-SYSTEM-EXT-MIB 鈼?nbsp; CISCO-IP-IF-MIB 鈼?nbsp; CISCO-IF-EXTENSION-MIB 鈼?nbsp; CISCO-SERVER-INTERFACE-MIB 鈼?nbsp; CISCO-NTP-MIB 鈼?nbsp; CISCO-IMAGE-MIB 鈼?nbsp; CISCO-IMAGE-CHECK-MIB 鈼?nbsp; CISCO-IMAGE-UPGRADE-MIB 鈼?nbsp; CISCO-CONFIG-COPY-MIB 鈼?nbsp; CISCO-ENTITY-VENDORTYPE-OID-MIB 鈼?nbsp; CISCO-BRIDGE-MIB
Industry Standards鈼?nbsp; IEEE 802.1D: Spanning Tree Protocol 鈼?nbsp; IEEE 802.1p: CoS prioritization 鈼?nbsp; IEEE 802.1Q: VLAN tagging 鈼?nbsp; IEEE 802.1Qaz: Enhanced transmission selection 鈼?nbsp; IEEE 802.1Qbb: Per-priority Pause 鈼?nbsp; IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol 鈼?nbsp; IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol 鈼?nbsp; IEEE 802.3: Ethernet 鈼?nbsp; IEEE 802.3ad: LACP with fast timers 鈼?nbsp; IEEE 802.3ae: 10 Gigabit Ethernet 鈼?nbsp; IEEE 802.3ba: 40 Gigabit Ethernet (Applies to 40G SR4, SR4-S, LR4, LR4-S, and CSR4 optics only) 鈼?nbsp; SFF 8431 SFP+ CX1 support 鈼?nbsp; RMON
Miscellaneous MIBs鈼?nbsp; START-MIB 鈼?nbsp; CISCO-LICENSE-MGR-MIB 鈼?nbsp; CISCO-FEATURE-CONTROL-MIB 鈼?nbsp; CISCO-CDP-MIB 鈼?nbsp; CISCO-RF-MIB 鈼?nbsp; CISCO-ETHERNET-FABRIC-EXTENDER-MIB 鈼?nbsp; CISCO-BRIDGE-MIB 鈼?nbsp; CISCO-FCOE-MIB 鈼?nbsp; CISCO-PORTCHANNEL-MIB 鈼?nbsp; CISCO-ZS-MIB
Warranty3-Year Warranty

Key Features

  • OEM Genuine Component verified by certified technicians.
  • Clean serial number ready for service contract registration.
  • Electrostatic Discharge (ESD) safe packaging.
  • Supports hot-swapping for zero-downtime maintenance.

Frequently Asked Questions

Is this product genuine OEM?

Yes, this N5K-C56128P, Cisco Nexus 56128P Switch, 48x10G SFP+/4x40G QSFP+/2RU Chassis (N5K-C56128P) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.

What warranty is included?

This N5K-C56128P, Cisco Nexus 56128P Switch, 48x10G SFP+/4x40G QSFP+/2RU Chassis includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.

How long does shipping take?

We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.

Can I return this product?

Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.

Is the N5K-C56128P, Cisco Nexus 56128P Switch, 48x10G SFP+/4x40G QSFP+/2RU Chassis compatible with my system?

Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the N5K-C56128P.

More in Networking

Explore Related Categories