Brand: StarTech.com · SKU: STA-PEXUSB3S42 · MPN: 4-Port PCI Express USB 3.0 Card · Category: Components

StarTech.com 4-Port PCI Express USB 3.0 Card, PCIe, USB 3.2 Gen 1 (3.1 Gen 1), Full-height / Low-profile, PCI 2.0, Black, Stainless steel, 3 m
| Depth | 167 mm |
|---|---|
| Width | 15 mm |
| Height | 120 mm |
| Manual | Yes |
| Weight | 90 g |
| Chipset | 2 x Renesas / NEC - µPD720202 |
| Hot-swap | Yes |
| Internal | Yes |
| UASP support | Yes |
| Certification | CE, FCC |
| Package depth | 144 mm |
| Package width | 171 mm |
| Host interface | PCIe |
| Package height | 30 mm |
| Package weight | 141 g |
| Product colour | Black, Stainless steel |
| Drivers included | Yes |
| Output interface | USB 3.2 Gen 1 (3.1 Gen 1) |
| Maximum cable length | 3 m |
| Compliance certificates | RoHS |
| Expansion card standard | PCI 2.0 |
| Data transfer rate (max) | 5 Gbit/s |
| Storage temperature (T-T) | -20 - 60 °C |
| Expansion card form factor | Full-height / Low-profile |
| Warranty | 3-Year Warranty |
| Weight | 90 g |
| Dimensions | 15 mm x 167 mm x 120 mm |
The PEXUSB3S42V 4-Port PCI Express USB 3.0 Card lets you add four USB 3.0 ports with two dedicated 5 Gbps channels to your PCIe x4-enabled PC. This independent port architecture improves USB 3.0 performance by transferring data on two individual channels to your computer, giving you faster file transfers. When multiple devices are connected, traditional single bus USB 3.0 cards share your maximum bandwidth between all ports. By employing a second host controller chipset, the transmission channel is shared across two ports rather than four. Dedicating up to 5 Gbps for each set of two ports reduces performance bottlenecks, and effectively doubles your total available to bandwidth to 10 Gbps. Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details. For high-power USB devices, this PCIe USB 3.0 card includes an optional SATA or LP4 power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 bus-powered devices (500mA for USB 2.0). The USB 3.0 card also supports USB Battery Charging Specification 1.2 (Apple Mode only), letting you charge compatible Apple devices (iPhones and iPads) faster than a standard USB 3.0 port. The controller card is compliant with USB 3.0 standards while offering backward compatibility with existing USB 2.0 / 1.1 devices. For added versatility, the USB 3.0 PCIe card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers. Backed by a StarTech.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows® 8, 8.1, Server 2012 and Linux kernel 2.6.37 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive. The StarTech.com Advantage - Increase the efficiency of your USB 3.0 devices with two dedicated bus channels and up to 5 Gbps of bandwidth per channel - Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported enclosure - Power high-powered USB devices as necessary, with the optional LP4 or SATA power connector
StarTech.com 4-Port PCI Express USB 3.0 Card. Host interface: PCIe, Output interface: USB 3.2 Gen 1 (3.1 Gen 1), Expansion card form factor: Full-height / Low-profile. Product colour: Black, Stainless steel, Maximum cable length: 3 m, Certification: CE, FCC. Chipset: 2 x Renesas / NEC - µPD720202, Data transfer rate (max): 5 Gbit/s. Windows operating systems supported: Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64,..., Server operating systems supported: Windows Server 2008 R2, Windows Server 2012. Width: 15 mm, Depth: 167 mm, Height: 120 mm
Field Engineers
Server Fleet Uniformity
"The STA-PEXUSB3S42 is the primary choice for Field Engineers performing critical Server Fleet Uniformity tasks. It meets all OEM performance specifications for StarTech.com systems."
Yes, this StarTech.com 4-Port PCI Express USB 3.0 Card (STA-PEXUSB3S42) is 100% genuine StarTech.com hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This StarTech.com 4-Port PCI Express USB 3.0 Card includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the STA-PEXUSB3S42.