APC SMT3000RMI2U + Service Bundle 3 uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W 9 AC outlet(s)

Specifications

Product Description

StruxureWare Central compatible: Enables centralized management via StruxureWare Central. Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement. Wide input voltage range: Designed for harsh electrical environments to save battery life. LED Indicators: Provide easy-to-read status of the unit and utility power conditions. Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress. Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. High online efficiency: Reduces utlility costs, generates less heat. Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter: Provides actual kilowatt hours of usage for energy conscious users. Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Disconnected battery notification: Warns when a battery is not available to provide backup power. Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs. Outlet group control: Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms: Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power. Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced. Cold-start capable: Provides temporary battery power when the utility power is out. Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Network manageable: Provides remote power management of the UPS over the network. Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Serial connectivity: Provides management of the UPS via a serial port. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature. USB connectivity: Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Key Features

APC SMT3000RMI2U + Service Bundle 3. UPS topology: Line-Interactive, Output power capacity: 3 kVA, Output power: 2700 W. AC outlet types: C13 coupler, C19 coupler, AC outlets quantity: 9 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 3 h. Form factor: Rackmount, Product colour: Black, Rack capacity: 2U. Compliance certificates: RoHS, Certification: C-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE

More in Components

• APC SMT3000RMI2U uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W 9 AC outlet(s)
• APC SMT3000RMI2U + WBEXTWAR3YR-SP-04 uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W 9 AC outlet(s)
• APC SMT3000RMJ2U uninterruptible power supply (UPS) 3 kVA 2700 W 8 AC outlet(s)
• APC-SMT3000RMT2U - THE 3KVA LINE INTERACTIVE 2U RACKMOUNT UPS PROVIDES PURE SINE WAVE POWER TO SUPP
• APC SMT3000RM2U uninterruptible power supply (UPS) 3 kVA 2700 W 8 AC outlet(s)
• APC SMT3000RM2UNC uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W
• APC SMT3000RM2UC uninterruptible power supply (UPS) Line-Interactive 2.88 kVA 2700 W 8 AC outlet(s)
• APC SMT3000RM2UC uninterruptible power supply (UPS) Line-Interactive 2.88 kVA 2700 W 8 AC outlet(s)

Related Guides

• How to Match a Replacement Server Power Supply by Part Number
• Keeping End-of-Life PowerEdge and ProLiant Fleets Running

Explore Related Categories