C9115AXI-F, Cisco Catalyst 9115AX Series Access Point, Wi-Fi 6/4x4 MU-MIMO/5Gbps

SKU: C9115AXI-F · MPN: C9115AXI-F · Category: Networking

C9115AXI-F, Cisco Catalyst 9115AX Series Access Point, Wi-Fi 6/4x4 MU-MIMO/5Gbps
Request for Quote
In Stock • 10 units

Cisco Catalyst 9115AX Series

Specifications

802.11ac• 4x4 downlink MU-MIMO with four spatial streams • MRC • 802.11ac beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support
802.11ax• 4x4 downlink MU-MIMO with four spatial streams • Uplink/downlink OFDMA • TWT • BSS coloring • MRC • 802.11ax beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support
Software• Cisco Unified Wireless Network Software Release 8.9 or later • Cisco IOS ® XE Software Release 16.11or later
Indicators• Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Interfaces• 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz • Management console port (RJ-45) • USB 2.0 (enabled via future software)
DescriptionCisco Catalyst 9115AX Series, F Domain
EnvironmentalCisco Catalyst 9115AXI • Nonoperating (storage) temperature: -22 ° to 158 ° F (-30 ° to 70 ° C) • Nonoperating (storage) altitude test: 25 ˚ C, 15,000 ft. • Operating temperature: 32 ° to 122 ° F (0 ° to 50 ° C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40 ˚ C, 9843 ft. Note: When the ambient operating temperature exceeds 40 ° C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE • Nonoperating (storage) temperature: -22 ° to 158 ° F (-30 ° to 70 ° C) • Nonoperating (storage) altitude test: 25 ˚ C, 15,000 ft. • Operating temperature: -4 ° to 122 ° F (-20 ° to 50 ° C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40 ˚ C, 9843 ft.
System memory• 2048 MB DRAM • 1024 MB flash
Integrated antenna• 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth • 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Dimensions (W x L x H)• Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
Input power requirements• 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ® ) • Cisco power injector, AIR-PWRINJ6= • 802.3af PoE • Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off.
Available transmit power settings2.4 GHz • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1 dBm (0.79 mW) • -4 dBm (0.39 mW) 5 GHz • 26 dBm (400 mW) • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1 dBm (0.79 mW) • -4 dBm (0.39 mW)
External antenna (sold separately)• Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) • Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
Supported wireless LAN controllers• Cisco Catalyst 9800 Series Wireless Controllers • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
Frequency band and 20-MHz operating channelsF regulatory domain: • 2.412 to 2.472 GHz; 13 channels • 5.250 to 5.350 GHz; 4 channels • 5.725 to 5.825 GHz; 4 channels
802.11n version 2.0 (and related) capabilities• 4x4 MIMO with four spatial streams • Maximal Ratio Combining (MRC) • 802.11n and 802.11a/g beamforming • 20- and 40-MHz channels • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 Dynamic Frequency Selection (DFS) • Cyclic Shift Diversity (CSD) support
Warranty3-Year Warranty

Key Features

  • OEM Genuine Component verified by certified technicians.
  • Clean serial number ready for service contract registration.
  • Electrostatic Discharge (ESD) safe packaging.
  • Supports hot-swapping for zero-downtime maintenance.

Frequently Asked Questions

Is this product genuine OEM?

Yes, this C9115AXI-F, Cisco Catalyst 9115AX Series Access Point, Wi-Fi 6/4x4 MU-MIMO/5Gbps (C9115AXI-F) is 100% genuine OEM hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.

What warranty is included?

This C9115AXI-F, Cisco Catalyst 9115AX Series Access Point, Wi-Fi 6/4x4 MU-MIMO/5Gbps includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.

How long does shipping take?

We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.

Can I return this product?

Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.

Is the C9115AXI-F, Cisco Catalyst 9115AX Series Access Point, Wi-Fi 6/4x4 MU-MIMO/5Gbps compatible with my system?

Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the C9115AXI-F.

More in Networking

Explore Related Categories