AIR-AP1852I-I-K9C, Cisco AIR-AP1852I, Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
Brand: Cisco · SKU: AIR-AP1852I-I-K9C · MPN: AIR-AP1852I-I-K9C · Category: Networking
802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, I Regulatory Domain, Configurable
Specifications
| Model | AIR-AP1852I-I-K9C |
|---|---|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for Cisco Aironet 1850 Series Access Points |
| Indicators | Status LED indicates boot loader status, association status, operating status, warnings, and errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE); 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (for Link Aggregation); management console port (RJ-45); USB 2.0 (enabled via future software) |
| Power Draw | 20.9 W. Note: when using PoE, actual power drawn may be higher depending on cable length |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, I Regulatory Domain. Model numbers ending in C are factory-shipped with Cisco Mobility Express software image by default. |
| Environmental | Storage temperature: -30 to 70°C (-22 to 158°F), operating temperature: 0 to 40°C (32 to 104°F), operating humidity: 10% to 90% (noncondensing), storage altitude: 25°C, 15,000 ft; operating altitude: 40°C, 9,843 ft |
| System Memory | 1 GB DRAM, 256 MB flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| Powering Options | 802.3at, Enhanced PoE, Cisco power injector (AIR-PWRINJ4=), Cisco local power supply (AIR-PWR-C=), Cisco power injector (AIR-PWRINJ5=, supports 802.3af only), 802.3af. Note: With 802.3af PoE, 1852e 2.4-GHz radio shifts to 2x3, USB and AUX ports disabled on 1852i/1852e. |
| Regulatory Domain | I (I regulatory domain): 2.412–2.472 GHz, 3 channels; 5.180–5.320 GHz, 8 channels |
| Integrated Antenna | 2.4 GHz: gain 3 dBi, internal omni, horizontal beamwidth 360°; 5 GHz: gain 5 dBi, internal omni, horizontal beamwidth 360° |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm) without mounting bracket |
| Input Power Requirements | AP1850: 44–57 VDC; power supply and power injector: 100–240 VAC, 50–60 Hz |
| 802.11n v2.0 Capabilities | 4x4 MIMO with four spatial streams, maximal ratio combining (MRC), 20- and 40-MHz channels, PHY rates up to 600 Mbps (40 MHz @ 5 GHz), packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), dynamic frequency selection (DFS), cyclic shift diversity (CSD) |
| 802.11ac Wave 1 & 2 Capabilities | 4x4 MIMO with four spatial streams (SU-MIMO), 4x4 MIMO with three spatial streams (MU-MIMO), MRC, transmit beamforming, 20-, 40-, and 80-MHz channels, PHY rates up to 1.7 Gbps (80 MHz @ 5 GHz), packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), DFS, CSD, rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500 Series, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500, Flex 7500, 8500, 5760 Series, Cisco Catalyst 3650/3850 with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Key Features
- OEM Genuine Component verified by certified technicians.
- Clean serial number ready for service contract registration.
- Electrostatic Discharge (ESD) safe packaging.
- Supports hot-swapping for zero-downtime maintenance.
Frequently Asked Questions
Is this product genuine OEM?
Yes, this AIR-AP1852I-I-K9C, Cisco AIR-AP1852I, Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna (AIR-AP1852I-I-K9C) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
What warranty is included?
This AIR-AP1852I-I-K9C, Cisco AIR-AP1852I, Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
How long does shipping take?
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Can I return this product?
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Is the AIR-AP1852I-I-K9C, Cisco AIR-AP1852I, Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna compatible with my system?
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852I-I-K9C.
More in Networking
- AIR-AP1852I-I-K9, Cisco AIR Series Access Point, 802.11ac Wave 2/4x4:4 MU-MIMO/Internal Antenna
- AIRAP1852I-KK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave 2, 4x4 MIMO, Mobility Express
- AIR-AP1852I-K-K9C, Cisco AIR-AP1852 Series Access Point, 4x4:4 MU-MIMO/Internal Antenna/802.11ac Wave 2
- AIR-AP1852I-K-K9, Cisco AIR-AP1852I, Access Point, 4x4:4 MU-MIMO, Internal Antenna, 802.11ac Wave 2
- AIRAP1852I-IK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave 2/2x2 MIMO/10-pack
- AIR-AP1852I-H-K9, Cisco AIR-AP1852I Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
- AIR-AP1852I-H-K9C, Cisco AIR-AP1850 Series Access Point, 802.11ac Wave 2/4x4:4 MIMO/Internal Antenna
- AIRAP1852I-HK910C, Cisco Aironet 1850i Series Access Point, 802.11ac Wave 2, 4x4 MIMO, Mobility Express