Brand: Cisco · SKU: AIR-AP1852E-S-K9 · MPN: AIR-AP1852E-S-K9 · Category: Components

802.11ac Wave 2 Access Point, 4x4:4, External-Ant, S Regulatory Domain
| Model | AIR-AP1852E-S-K9 |
|---|---|
| Indicators | Status LED: boot loader status, association status, operating status, warnings, errors |
| Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45, PoE); 1 x 10/100/1000BASE-T autosensing (RJ-45, AUX for Link Aggregation); management console port (RJ-45); USB 2.0 (future support) |
| Power Draw | 20.9 W. Note: Power drawn from PoE equipment may be higher depending on cable length. |
| Description | 802.11ac Wave 2 Access Point, 4x4:4, External-Ant, S Regulatory Domain |
| System Memory | 1 GB DRAM; 256 MB Flash |
| Deployment Modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh |
| External Antenna | Certified for antenna gains up to 6 dBi (2.4 GHz & 5 GHz); Cisco offers a wide range of antennas for varied deployment scenarios (sold separately) |
| Powering Options | 802.3at; Enhanced PoE; Cisco power injector (AIR-PWRINJ4=); Cisco local power supply (AIR-PWR-C=); Cisco power injector (AIR-PWRINJ5=, supports 802.3af only); 802.3af. Note: If powered by 802.3af PoE, the 2.4-GHz radio shifts to 2x3, and the USB/AUX ports are disabled. |
| Regulatory Domain | S (S regulatory domain): 2.412–2.472 GHz (3 channels); 5.180–5.320 GHz (8 channels); 5.500–5.700 GHz (11 channels); 5.745–5.825 GHz (5 channels) |
| 802.11n Capabilities | 4x4 MIMO with four spatial streams, maximal ratio combining (MRC), 20-/40-MHz channels, PHY data rates up to 600 Mbps (40 MHz, 5 GHz), A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), 802.11 DFS, cyclic shift diversity (CSD) |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm) without mounting bracket |
| Software Compatibility | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Environmental Conditions | Nonoperating temperature: -30°C to 70°C (-22°F to 158°F); storage altitude: 15,000 ft at 25°C; operating temperature: -20°C to 50°C (-4°F to 122°F); operating humidity: 10%–90% (noncondensing); operating altitude: 9,843 ft at 40°C |
| Input Power Requirements | AP1850: 44–57 VDC; power supply/injector: 100–240 VAC, 50–60 Hz |
| 802.11ac Wave 1/2 Capabilities | 4x4 MIMO with 4 or 3 spatial streams (single or multiuser MIMO), MRC, 802.11ac beamforming, 20-/40-/80-MHz channels, PHY data rates up to 1.7 Gbps (80 MHz, 5 GHz), A-MPDU/A-MSDU (Tx/Rx), 802.11 DFS, CSD, rogue device detection |
| Supported Wireless LAN Controllers | Cisco 2500 Series, Wireless Controller Module for ISR G2, WiSM2 for Catalyst 6500 Series, 5500 Series, Flex 7500 Series, 8500 Series, 5760 Series, Cisco Catalyst 3650/3850 Series switch with integrated controller, Cisco Mobility Express |
| Warranty | 3-Year Warranty |
Yes, this AIR-AP1852E-S-K9, Cisco AIR-AP1852E, 802.11ac Wave 2 AP, 4x4:4 MIMO, Ext Ant, S Domain (AIR-AP1852E-S-K9) is 100% genuine Cisco hardware. All our products are verified by certified technicians and come with clean serial numbers ready for service contract registration.
This AIR-AP1852E-S-K9, Cisco AIR-AP1852E, 802.11ac Wave 2 AP, 4x4:4 MIMO, Ext Ant, S Domain includes our standard 3-Year Warranty covering all manufacturing defects. We also offer advanced replacement options for minimal downtime.
We offer free ground shipping which typically takes 3-5 business days. Expedited shipping options are available at checkout for faster delivery.
Yes, we have a 30-day return policy on all products. Restocking fees may apply for opened items. Please see our return policy for complete details.
Please check the specifications tab for detailed compatibility information. Our technical team is available to assist with compatibility questions for the AIR-AP1852E-S-K9.